Making the most of available space is a key priority in modern manufacturing. This also includes the removal of glass waste. The challenge to handle glass waste effectively increases when multiple automated cutting systems for float and laminated glass are in use. By focusing on innovative waste management solutions, companies can avoid manual production interruptions for waste management while saving valuable space in the production hall.
Innovative waste glass disposal systems by LiSEC
The new LiSEC waste glass disposal systems for float glass (GSA-CF) and for laminated glass (GSA-CL) enable automatic waste glass handling. Both systems consist of a transport conveyor belt, a cullet crusher and waste collection station. How do they work?
Float glass disposal system | GSA-CF
The glass waste disposal on the float glass cutting line is installed after each of the break-out station: At the front and rear trim as well as at the side trimming stations.
The trim cuts drop off the cutting table at the break-out station to the conveyor below. A high-strength metal conveyor belt transports the glass waste to a slowly rotating star roller which crushes them into smaller cullet with minimal dust and noise pollution. The small cullet is conveyed further into a fill level monitored collection container, which is located within soundproofed housing to also keep dust and noise pollution at a minimum.
- The system can process float glass waste up to 19 mm thickness and 300 mm width. The processable length correlates to the maximum glass length on the float cutting table.
- LiSEC recommends the new system with these machines: ARS, TCY, RBA, RBF
Laminated glass disposal system | GSA-CL
The glass waste disposal on the lami glass cutting line is installed after each of the break-out station: At the front and rear trim as well as at the side trimming stations.
The trim cuts drop off the cutting table at the break-out station to the conveyor below. A high-strength metal conveyor belt transports the glass waste to a slowly cutting Guillotine knife which cuts them into smaller pieces with minimal dust and noise pollution. The small cullet is conveyed further into a fill level monitored collection container, which is located within soundproofed housing to also keep dust and noise pollution at a minimum.
- The system can process lami glass waste up to 1010.6 (2 panes with 10 mm thickness each) and 300 mm width. The processable length correlates to the maximum glass length on the lami cutting table.
- LiSEC recommends the new system with these machines: VSL-A37/33, VSL-A47/33, VSL-A61/33
The benefits of automated glass waste disposal
- Uninterrupted production
Eliminating the need for stops to handle waste ensures a smooth and consistent workflow. - No manual disposal of waste glass
Automating the waste management frees up employees to focus on more critical tasks and reduces labour costs. - Less space needed for waste glass
Smaller pieces require less storage space, allowing for better utilization of the production hall. - Improved safety
Automated systems minimize the risk of injuries through sharp glass pieces.
Availability
The system is available immediately and can be integrated into existing plants as well as added to new machines. Get your quote from your local sales contact!
